Drawer Won T Close All The Way
How to Fix a Misaligned Desk Drawer
- Comments: 0
- Favorites: 6
- How to Fix a Misaligned Desk Drawer 5 steps
Introduction
Do you have a desk drawer that just won't line up correctly? Follow the simple steps in this guide to correctly line up your drawer and make your life just a little bit easier.
The specific screwdrivers and screws used in this guide may not be the same used in other desk drawers. If you have any questions I recommend going to your local hardware store.
Parts
-
-
Start by pulling the drawer out and detaching it from the hardware mounted to the desk.
-
To do this you need to push the black plastic lever up in order to disengage the drawer's hardware from the desk's hardware.
-
-
-
In this case the hardware on the left side of the drawer is not functioning properly due to a bent metal piece.
-
Using the flat head screwdriver you can push the metal down around each ball bearing in order to allow the drawer to slide back and forth.
-
-
-
The hardware attached to the drawer is also not functioning properly due to missing screws.
-
Use replacement screws to properly attach the hardware to the drawer and to allow it to support the drawer's weight.
-
Take a screw from the drawer to your local hardware store for help finding matching screws.
-
-
-
After attaching the hardware slide the drawer's piece into its counterpart on the desk.
-
It can be awkward to maneuver the drawer in alone. You may need to get some help for this step.
-
-
-
Enjoy your fully functioning drawer!
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Dante Mazzanti
Member since: 02/23/2015
566 Reputation
3 Guides authored
0 Comments
Drawer Won T Close All The Way
Source: https://www.ifixit.com/Guide/How+to+Fix+a+Misaligned+Desk+Drawer/37585
Posted by: levinespinat.blogspot.com
0 Response to "Drawer Won T Close All The Way"
Post a Comment